SHAPES   
Wide flange, standard beams, structural tubes, channels, tees, and angles can be rolled easy or hard way. Standard and non-standard bars can be rolled the hard way in any alloy up to 3" x 12". Cyclinders can be cold formed to tight or large diameters up to 6" thick for uses such as electric motor frames, bearings, valve bodies, and gear blanks.
 
Beams rolled Easy Way. Wide Flange and Standard, ALL SIZES.  
Tees rolled stem in, stem out or stem up.  
Tees cut from Wide Flange and Standard beams,  ALL SIZES.
Beams rolled Hard Way. Wide flange and Standard, ALL SIZES.   
Channels rolled flange in and flange out,  
ALL SIZES.
Channels rolled Hard Way through MC18". Angles rolled leg out and leg in ALL SIZES.
STRUCTURAL SHAPES
 
 
Home   
Introduction   
Services 
The Harvic T-1200 		 Photos  
Plant  
Contact RECO
 
 
 
MISCELLANEOUS          
 
Crane Rail rolled head out, head in or head up.   
ALL SIZES through 175# per yard.		 TurbineSpacer Bands Rolled to 3rd decimal place accuracy.
Structural Tubes   
Square and rectangular tubes rolled hard way or Easy Way.		   Squares  
Rolled up to 8".		   Cones rolled from 
plate up to 2" thick. Many sizes rolled in one piece.
 
  RINGS AND FLANGES
Welded flanges, finished to your specifications. 
  
We have the capability to roll all standard and non-standard bars the hard way in any alloy up to  
3" x 12". 
  
Bars can be rolled in segments or full rings, with an open butt joint or welded. 
  
Close tolerances assure minimum machining. 
 
line 
General Office: RECONelson, Inc. 
248 Thomas Street, Newark, NJ 07114 
Phone: (973) 824-4726  •  Fax: (973) 824-4728 
Email: RecoNelson@aol.com